COST ANALYSIS OF CORN MILLING MACHINE MAINTENANCE(A STUDY AT CV MANDIASIH TABANAN)
DOI:
https://doi.org/10.5281/zenodo.22250465Keywords:
Maintenance strategy, maintenance costs, cost efficiencyAbstract
Maintenance costs are costs incurred from maintenance activities performed by a company. High maintenance costs may reduce the company's profitability. Selecting an appropriate maintenance strategy aims to improve the efficiency of maintenance cost utilisation so that maintenance costs can be reduced, thereby increasing profitability. This study aims to identify the most appropriate machine maintenance strategy based on the costs incurred under two alternative maintenance strategies, namely the Corrective Maintenance Policy and the Preventive Maintenance Policy, for the corn milling machine owned by CV Mandiasih. This research was conducted at CV Mandiasih, Tabanan. This study employed a quantitative descriptive research design. The sampling technique used was total sampling, with the research sample consisting of one corn milling machine owned by CV Mandiasih. The study utilised both qualitative and quantitative data obtained from primary and secondary sources. Data were analysed using descriptive analysis techniques. The results indicate that the Preventive Maintenance strategy is the most appropriate strategy for maintaining the machinery at CV Mandiasih because it incurs lower maintenance costs than the Corrective Maintenance strategy, amounting to Rp30,049,776 compared to Rp31,118,971. This study contributes to the management of CV Mandiasih by providing a cost-based analysis for determining the machine maintenance strategy with the minimum maintenance cost in order to enhance the company's profitability.
Downloads
References
Agustina, B. F., Kantun, S., & Herlindawati, D. (2022). Analisis Efisiensi Biaya Produksi pada UD Mutiara Rasa Kabupaten Jember. Jurnal Pendidikan Ekonomi, 16(2), hal. 309-314. doi.org/10.19184/jpe.v16i2.25357
Ali, M. & Arhami, A. (2021). Upaya Meminimumkan Biaya Pemeliharaan Mesin dengan Metode Preventive dan Breakdown Maintenance pada Workshop Arita Steel Medan. JEMSI. 7(2), hal. 94-97.
Andrioaia, D. & Gaitan, V. G. (2023). A Specialty Literature Review of the Predictive Maintenance Systems. Journal of Engineering Studies and Research, 29(4), pp. 17-23 dx.doi.org/10.29081/jesr.v29i4.002
Anggraini, M. & Maulana, R. (2016). Pengaruh Pemeliharaan Mesin Terhadap Kualitas Sepatu Pada PT. Nikomas Gemilang. Jurnal Manajemen dan Bisnis (SAINS), 9(1), hal. 59-74. dx.doi.org/10.35448/jmb.v9i1.5356
Ansari, F., Fathi, M., & Seidenberg, U. (2016). Problem-solving approaches in maintenance cost management: a literature review. Journal of Quality in Maintenance Engineering, 22(4), pp. 334–352. doi:10.1108/jqme-04-2015-0012
Arikunto, Suharsimi. Penelitian 2017. Suatu Kebutuhan Prosedur Penelitian Praktis. Yogyakarta: Nusa Media
Azizah, N. B., Indriati, S., Widuri, R., & Shaferi, S. (2020). Analisis Repair Maintenance Policy Dan Preventive Maintenance Policy Untuk Meminimalkan Total Maintenance Cost Pada Mesin Pleating PT Duta Nichirindo Pratama. Jurnal Ekonomi, Bisnis dan Akuntansi, 22(4), hal. 404-420. jp.feb.unsoed.ac.id/index.php/jeba/article/view/1765
Bahrudin, A., Setiawan, I., Arifin, M. M., & Fipiana, W. I. (2021). Analysis of Preventive Maintenance and Breakdown Maintenance on Production Achievement in the Food Seasoning Industry. Jurnal Optimasi Sistem Industri, 14(2), pp. 253–261. doi.org/10.31315/opsi.v14i2.5540
Basri, E. I., Razak, I. H. A., Samat, H. A., & Kamaruddin, S. (2017). Preventive Maintenance (PM) Planning: a Review. Journal of Quality in Maintenance Engineering, 23(2), pp. 114-143. doi.org/10.1108/JQME-04-2016-0014
Buer, S., Strandhagen, J. O., & Chan, F. T. S. (2018). The link between Industry 4.0 and lean manufacturing: mapping current research and establishing a research agenda. International Journal of Production Research, 56(4), pp. 1-17 doi.org/10.1080/00207543.2018.1442945
Ceglinski, Pawel. (2017). The Concept of Competitive Advantages. Logic, Sources and Durability. Journal of Positive Management, 7(3), pp. 57-70. dx.doi.org/10.12775/JPM.2016.016
De Jonge, B., & Scarf, P. A. (2019). A Review on Maintenance Optimization. European Journal of Operational Research, 285(3), pp. 805-804. doi:10.1016/j.ejor.2019.09.047
Derlini, D., & Siagian, T. (2025). Penerapan Lean Manufacturing untuk Mengurangi Waste dalam Proses Produksi di Industri Manufaktur. Jurnal Review Pendidikan Dan Pengajaran, 8(1), hal. 784–790. doi.org/10.31004/jrpp.v8i1.41606
Duli, N. (2019). Metodologi Penelitian Kuantitatif: Beberapa konsep dasar untuk penulisan skripsi & analisis data dengan SPSS. Yogyakarta: Deepublish.
Ermaya, Y.A., Fathony, A. A., & Harismawati, N. (2016). Pengaruh Biaya Pemeliharaan Alat-Alat Produksi Terhadap Harga Pokok Produksi (Studi Kasus Pada PT. Unilon Textile Industries). Jurnal Ilmiah Akuntansi, 7(1), hal. 24-36. ejournal.unibba.ac.id/index.php/akurat/article/view/97
Ervanius, Sayuti, A., & Efrina, L. (2025). Faktor-Faktor Yang Mempengaruhi Produksi dalam Perspektif Ekonomi Islam (Studi Pada Usaha Tani Kopi Di Muara Jaya Ii Kecamatan Kebun Tebu Lampung). ATTAMYIS: Jurnal Ekonomi Syariah, 2(1), hal. 110-120. journal.an-nur.ac.id/index.php/jes/article/view/3660
Fauziyyah, A. & Sriyanto. (2015). Analisis Perhitungan Biaya Perawatan Sebagai Dasar Evaluasi Penggantian Mesin CTCM (Continuous Tandem Cold Mill) pada Divisi Cold Rolling Mill PT. Krakatau Steel. Industrial Engineering Online Journal, 4(1). ejournal3.undip.ac.id/index.php/ieoj/article/view/7944
Franciosi, C., Iung, B., Miranda, S., & Riemma, S. (2018). Maintenance for Sustainability in the Industry 4.0 context: a Scoping Literature Review. IFAC-PapersOnLine, 51(11), pp. 903-908 https://doi.org/10.1016/j.ifacol.2018.08.459
Hamasha, M. M., Bani-Irshid, A. H., Almashaqbeh, S., & Shwahen, G. (2023). Strategical Selection of Maintenance Type Under Different Conditions. Scientific Reports, 13(15560). doi.org/10.1038/s41598-023-42751-5
Hastary, S., Yusuf, A. A., & Awaludin, R. (2021). Optimalisasi Proses Produksi dengan Menggunakan Metode Overall Equipment Effectiveness. 14(1), hal 119-130. doi.org10.46306/jbbe.v14i1
Heizer, Jay & Barry Render. (2017). Operations Management; Sustainability and Supply Chain Management (12th Edition). Amerika Serikat: Pearson
Indriani, R., Simanjuntak, L. F., Boru Dalimunthe, A. N. S., Kautsar, F. A., Sihombing, J., & Simanjuntak, T. C. (2024). Memahami Manajemen Operasional Pada Proses Produksi. Jurnal Ekonomi Manajemen Dan Bisnis, 2(4), pp. 201–206. doi.org/10.62017/jemb
Irsyad, M., Mukhsin, M., & Satyanegara, D. (2024). Pengaruh Pemeliharaan Mesin Dan Pengendalian Persediaan Bahan Baku Terhadap Kinerja Proses Produksi Pada Industri Kecil Pengolahan Kayu. Jurnal Ilmiah Mahasiswa Ekonomi Manajemen, 9(1), hal. 15-30 doi.org/10.24815/jimen.v9i1.28753
Islami, X., Mustafa, N., & Latkovikj, M. T. (2020). Linking Porter’s Generic Strategies to Firm Performance. Future Business Journal, 6(3) doi.org/10.1186/s43093-020-0009-1
Jin, X., Siegel, D., Weiss, B. A., Gamel, E., Wang, W., Lee, J., & Ni, J. (2016). The Present Status and Future Growth of Maintenance in US Manufacturing: Results From A Pilot Survey. Manufacturing Review, 3(10) pp. 1-10. doi.org/10.1051/mfreview/2016005
Julyanthry, Siagan, V., Asmeati, Hasibuan, A., Simanullang, R., Pandarangga, A. P., Purba, S., Purba, B., Pintauli, R. F., Rahmadana, M. F., & Eljihad Akbari Syukriah M. (2020). Manajemen Operasi dan Produksi. Medan: Yayasan Kita Menulis
Jumirin & Lubis, Y. (2018). Pengaruh Biaya Operasional terhadap Peningkatan Pendapatan Operasional pada PT. Pelabuhan Indonesia I (Persero) Cabang Belawan. Jurnal Riset Akuntansi dan Bisnis, 18(2), hal. 162-177. doi.org/10.30596/jrab.v17i2.3309
Kadhafi, A. & Hariono, B. (2023). Analisis Repair Maintenance Policy dan Preventive Maintenance Policy pada Mesin Ayakan PTPN XII Malangsari. Proceeding NaCIA (National Conference on Innovative Agriculture), hal. 1-11
Khatab, A., Diallo, C., & Venkatadri, U. (2018). Condition-Based Selective Maintenance for Stochastically Degrading Multi-Component Systems under Periodic Inspection and Imperfect Maintenance. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 232(4), pp. 1-17 doi.org/10.1177/1748006X18765521
Krajewski, Lee J. & Manoj K. Malhotra. (2022). Operations Management: Process and Supply Chains (13th Edition). Essex: Pearson
Lukito, T., Herlianti, R., Mayanti, M., & Kusumah, L. H. (2025). Implementation of predictive maintenance in various Industry: A Review. TEKNOSAINS: Jurnal Sains, Teknologi dan Informatika, 12(1), pp. 133-144 doi.org/10.37373/tekno.v12i1.1338
Magfirah, O.S. & Fitri, Y. (2019). Analisis Efisiensi Biaya Produksi Dengan Penggunaan Biaya Standar Dalam Meningkatkan Rasio Net Profit Margin (Studi Empiris Pada Umkm Dendeng Sapi Di Banda Aceh). Jurnal Ilmiah Mahasiswa Ekonomi Akuntansi, 4(2), hal. 334-343. dx.doi.org/10.24815/jimeka.v4i2.12262
Mahanum. (2021). Pengambilan Keputusan dan Perencanaan Kbijakan. Jurnal Pendidikan dan Ilmu Kependidikan, 6(1), hal. 154-163 doi.org/10.46576/jsa.v6i1.1336
Mahmudi, (2015). Manajemen Kinerja Sektor Publik. Yogyakarta: UPP STIM YKPN.
Malik, Y. F., Ernawati, D. P., & Rizkiyanti, A. A. (2024). A Literature Review on Operations Management and Strategy. International Journal of Social Science and Business, 8(2), pp. 311-316. dx.doi.org/10.23887/ijssb.v68i2.76906
Mulya, A. E., Yusnita, R. T., & Lestari, S. P. (2022). Pengaruh Preventive Maintance dan Breakdown Maintance terhadap Kelancaran Proses Produksi. Jurnal Ekonomi dan Bisnis, 1(2), hal. 49– 54. doi:10.57151/jeko.v1i2.38
Naciri, S. & Idrissi, M. A. J. (2014). Third-Party Application Maintenance Management. International Journal of Computer Applications, 103(6), pp. 1-7 doi.org/10.5120/18075-8766
Nadeak, G. X., Thamrin, G. A. R., & Rahmadi, A. (2021). Efektivitas dan Efisiensi Mesin-Mesin dalam Satu Rangkaian pada Proses Produksi Kayu Lapis (Studi Kasus Di Pt Surya Satrya Timur). Jurnal Sylva Scienteae. 4(5), hal. 859-869 doi.org/10.20527/jss.v4i5.4208
Nasution, M., Bakhori, A., & Novarika, W. (2021) Manfaat Perlunya Manajemen Perawatan untuk Bengkel Maupun Industri. Buletin Utama Teknik, 16(3), hal. 248-252
Natanegara, D. & Terawati, M. T. (2019). Pengaruh Biaya Operasional Terhadap Laba Pada Perusahaan Subsektor Makanan Dan Minuman (Studi Kasus Bursa Efek Indonesia). Proceeding FRIMA (Festival Riset Ilmiah Manajemen & Akuntansi). Bandung.
Netland, T. H. (2016). Critical Success Factors for Implementing Lean Production: The Effect of Contingencies. International Journal of Production Research, 54, pp. 2433-2448 doi.org/10.1080/00207543.2015.1096976
Nurlaela, S. (2015). Strategi Pengembangan Usaha Melalui Penguatan Manajemen, Pemasaran, dan Keuanganindustri Kreatif Kerajinan Mebel Ekspor di Kabupaten Klaten. Proceeding Seminar Nasional IENACO.
Nwanya, S. C., Udofia, J. I., & Ajayi, O. O. (2017). Optimization of machine downtime in the plastic Manufacturing. Cogent Engineering, 4(1). doi.org/10.1080/23311916.2017.1335444
Pahiratan, A. (2017). A Literature Review on Outsourcing of Services in Universities. IOSR Journal of Business and Management, 19(12), pp. 47-56 doi.org/10.9790/487X-1912044756
Patidar, L., Soni, V. K., & Soni, P. (2017). Maintenance Strategies and their Combine Impact on Manufacturing Performance. International Journal of Mechanical an Production Engineering Research and Development, 7(1), pp. 2249-6890
Poór, P., Ženíšek, D., & Basl, J. (2019). Historical Overview of Maintenance Management Strategies: Development from Breakdown Maintenance to Predictive Maintenance in Accordance with Four Industrial Revolutions. Proceeding International Conference on Industrial Engineering and Operations Management. Pilsen.
Pomantow, L. P., Tinangon, J. J., & Runtu, T. T. (2021). Perhitungan Harga Pokok Produksi dengan Menggunakan Metode Full Costing pada RM. Ayam Goreng Krispi Dahar. Jurnal Riset Ekonomi, Manajemen, Bisnis, dan Akuntansi, 9(3), hal. 843-852 doi.org/10.35794/emba.v9i3.35057
Pradnyandari, T. & Purnawati, N. (2019). Peran Maintenance dalam Memoderasi Pengaruh Scheduling terhadap Kinerja Maskapai Penerbangan (Studi pada Garuda Indonesia Airline). E-Jurnal Manajemen, 8(6), hal. 3473–3501. doi:10.24843/EJMUNUD.2019.v08.i06.p07
Pranowo, I. D., (2019). Sistem dan Manajemen Pemeliharaan (Maintenance: System And Management). Sleman: Penerbit Deepublish.
Purnama, C. (2019). Analyze Machine Maintenance Cost with Corrective Method and Preventive Method to Increase Production Result. The International Journal of Business Review (The Jobs Review). 2(1), pp. 1-8. doi.org/10.17509/tjr.v2i1.15307
Rahmasyah, M. F. & Safirin, M. T. (2024). Analisis Perbaikan Downtime Mesin Injection Molding dengan Pendekatan DMAIC di PT XYZ. Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro Dan Informatika, 2(1), hal. 25–34. doi.org/10.61132/jupiter.v2i1.39
Rahmawati, F., Sari, Y. K. E., & Sopian, D. (2021). Pengaruh Biaya Operasional Terhadap Laba Bersih (Studi Kasus pada Perum Jasa Tirta II Jatiluhur Purwakarta Periode 2012-2019). Jurnal Bisnis, 9(1), hal. 75-85.
Rinaldi, M., Kurniawan, D., & Zaini, E. (2016). Usulan Perbaikan Proses Produksi pada Lantai Produksi Roland Chair Menggunakan Konsep Lean Manufacturing. Jurnal Online Institut Teknologi Nasional, 2(4), hal. 171-182 https://ejurnal.itenas.ac.id/index.php/rekaintegra/article/view/1099
Rosmiati, M., Surya, Ma’arif, S., Paudin, M., & Suyatna, R. G. (2025). Analisis Fungsi Manajemen Operasional pada UMKM Es Teh Indonesia Cabang Serang. Jurnal Manuhara, 3(1), hal. 373-385doi.org/10.61132/manuhara.v3i1.1571
Rukajat, Ajat. (2018) Pendekatan Penelitian Kuantitif: Quantitative Research Approach (Cetakan pertama). Yogyakarta: Deepublish.
Sala, R., Francalanza, E., & Arena, S. (2025). A review on three decades of manufacturing maintenance research: past, present and future directions. Production & Manufacturing Research, 13(1). doi.org/10.1080/21693277.2025.2469037
Shrestha, P. (2020). Outsourcing Practices: Benefits and Pitfalls as Perceived by Professionals and Managers. Pravaha, 26(1), pp. 135-140 doi.org/10.3126/pravaha.v26i1.41868
Soesatijono, S. & Darsin, M. (2021). Literature Studies on Maintenance Management. Journal of Energy, Mechanical, Material, and Manufacturing Engineering, 6(1), pp. 67-74 doi.org/10.22219/jemmme.v6i1.12571
Somjai, S. (2017). Advantages and Disadvantages of Outsourcing. The Business and Management Review, 9(1), pp. 157-160
Saputra, R. M., Koesdiningsih, N., & Rani, A. M. (2020). Analisis Pemeliharaan Mesin Dengan Menggunakan Metode Preventive Maintenance Dan Corrective Maintenance Untuk Meminimumkan Biaya Pemeliharaan Mesin Pada PT. Budykarya Utama Sejati Bandung. Prosiding Manajemen, 6(2), 1156-1160. dx.doi.org/10.29313/.v6i2.23291
Sari, K. P., Yanuar, A. A., & Rendra, M. (2017). Penerapan Lean Manufacturing Untuk Meminimasi Waste Waiting Time Pada Proses Produksi Spring Guide XXX Di CV. Gradient. Jurnal Rekayasa Sistem & Industri, 4(2), hal. 170-177 doi.org/10.25124/jrsi.v4i01.218
Sari, N. & Rimawan, M. (2020). Efisiensi Biaya Operasional Terhadap Peningkatan Laba Bersih. Jurnal Ilmu Keuangan dan Perbankan, 9(2), hal. 108-116. doi.org/10.34010/jika.v9i2.2897
Siregar, C. T., Kindagen, P. & Palendeng, I. D. (2022). Evaluasi Pemeliharaan Mesin dan Peralatan Produksi PT. Multi Nabati Sulawesi (MNS) Kota Bitung. Jurnal EMBA, 10(3), hal. 428-435 doi.org/10.35794/emba.v10i3.42362
Sodikin, I., Parwati, C. I., Fayzi, F., & Indrayana, M. (2024). Penjadwalan Perawatan Mesin Dengan Metode Preventive Maintenance & Predictive Maintenance (Studi Kasus Di PLTD Kota Masohi). Jurnal Tekstil (JUTE), 7(1), hal. 37-46. doi.org/10.59432/jute.v7i1.88
Solanski S., Kumar-Paul, V., & Singh, V. (2022). Blueprint for maintenance management of institutional buildings in India. Journal of Building Pathology and Rehabilitation, 8(84), pp. 1-11. doi.org/10.1007/s41024-023-00326-x
Srirahayu, E. & Saleh, H. H. M. (2021) Analisis Biaya Pemeliharaan Peralatan Produksi Pada Pabrik Tahu Super Afifah Di Kota Palu. Jurnal Ilmu Manajemen Universitas Tadulako (JIMUT), 7(2), hal. 97-106. doi.org/10.22487/jimut.v7i2.228
Stenström, C., Norrbin, P., Parida, A., & Kumar U. (2016). Preventive and corrective maintenance – cost comparison and cost–benefit analysis. Structure and Infrastructure Engineering, 12(5), pp.603-617 doi.org/10.1080/15732479.2015.1032983
Sudaryono, Rahardja, U., & Lutfiani, N. (2020). The Strategy of Improving Project Management Using Indicator Measurement Factor Analysis (IMF) Method. Journal of Physics: Conference Series. 1477 doi.org/10.1088/1742-6596/1477/3/032023
Sugiyono. (2016). Metode Penelitian Kuantitatif, Kualitatif dan R&D. Bandung: Alfabeta
Sugiyono. (2017). Metode Penelitian Bisnis Pendekatan Kuantitatif, Kualitatif, Kombinasi dan R&D. Bandung: Alfabeta
Tortorella, G. L., Miorando, R., & Marodin, G. (2017). Lean supply chain management: Empirical research on practices, contexts and performance. International Journal of Production Economics, 193, pp. 98-112 doi.org/10.1016/j.ijpe.2017.07.006
Veriyanto, S. S. & Yasin, M. (2023). Sektor Industri Pada Pemetakan Peluang Ekonomi Makro Kota Surabaya. Wawasan : Jurnal Ilmu Manajemen, Ekonomi Dan Kewirausahaan, 1(3), hal. 13–23. doi.org/10.58192/wawasan.v1i3.862
Wirawana, H. ., & Yunus, E. (2022). Pengaruh Praktik Lean Manufacturing Terhadap Profitabilitas Melalui Minimisasi Persediaan di Industri Elektronik dan Otomotif Indonesia . Jurnal Aplikasi Bisnis Dan Manajemen, 8(2), hal. 524-533 doi.org/10.17358/jabm.8.2.524
Wireman, T. (2014). Benchmarking Best Practices for Maintenance and Reliability(3rd Edition). South Norwalk, CT, USA: Industrial Press Inc.
Yusuf, M., & Budiawan, W. (2024). Penetapan Umur Ekonomis Mesin Penggiling Kedelai Menggunakan Metode Equivalent Uniform Annual Cost (Studi Kasus: Usaha Mikro Produk Tahu Handayani). Industrial Engineering Online Journal, 14(1). ejournal3.undip.ac.id/index.php/ieoj/article/view/48959
Zhu, T., Ran, Y., Zhou, X., & Wen, Y. (2025). A Survey of Predictive Maintenance: Systems, Purposes and Approaches. IEEE Communications Surveys & Tutorials, 28, pp. 633-671 doi.org/10.1109/COMST.2025.3567802
